http://mustangonlyone.com/blog Our restorations Sun, 21 Feb 2010 01:30:03 +0000 http://backend.userland.com/rss092 en Grover and Donna decided to let us work on their baby. These photos are of the convertible when they dropped it off at our restoration facility. Can't wait to get started! http://mustangonlyone.com/blog/2010/02/20/february-4-new-addition/ Grover and Donna are interested in having us work on their '70 convertible. Here are some preliminary inspection photos that we used to build their project sheet. http://mustangonlyone.com/blog/2010/02/20/january-25-preliminary-inspection/ Here are some photos of Cathy's Mustang being disassembled. They also photographed some of the parts to note the condition of the parts. http://mustangonlyone.com/blog/2010/02/20/january-27-28-disassembly/ Well, Allen drove down to work on his Mustang again.  Working with Pat, Ross, and Tim, they got a lot of the drive train disassembled for restoration work.   What a nice Valentine's Day reunion for Allen and his baby!  Did Allen's wife know?? http://mustangonlyone.com/blog/2010/02/20/february-14-disassembly/ Guy's 68 coupe made it!  Here's a couple of videos showing the Mustang coming off the transport.  There is also some footage of it running and a walk around quick look at the Mustang! http://mustangonlyone.com/blog/2010/02/20/february-14-unload-videos/ Here are a couple of old photos that didn't merit a full blog post. They are shots from inside the cowl. No rust anymore! Here the guys are seam sealing the floor pans and cowl area. This will seal the interior against water leaks and, ultimately, rust damage. http://mustangonlyone.com/blog/2010/02/20/february-4-seam-seal/ We've got almost everything installed and it's almost time to load this baby. Here are a couple of videos of the engine running. Sounds great! Love that V8 engine at work! http://mustangonlyone.com/blog/2010/02/20/february-19-engine-videos/ We're working on re-installing the interior to Laurens's Fastback, and we've also begun installing the door and window mechanics. Tim also put a final layer of etch-prime and gray-prime on the rear quarter panel. http://mustangonlyone.com/blog/2010/02/16/january-22-laurenss-reassembly-cont/ We're working on reassembling Laurens's Fastback here, putting in the rear windshield, installing stuff into the engine compartment, etc. The weld work on his rear quarter panel also needed a little more touching up before we consider it done, so Tim is working on that as well. http://mustangonlyone.com/blog/2010/02/16/january-21-laurenss-reassembly/ Need to catch up on these blog updates! Here is an old one from when we were re-installing Laurens's windshields. It's a very meticulous process, getting the rubber seals set just right and glued down, and then we'll have to test them for leaking, and THEN, if no ... http://mustangonlyone.com/blog/2010/02/16/january-20-laurenss-windshield-installation/